Audio Connection To Optional Equipment - LG DK487 Owner's Manual

Audio Connection to Optional Equipment

Connect the DVD player to your optional equipment
for audio output.
Rear of DVD player
O X
OPTICAL COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
Rear of
DVD player
R
10
A
R L
AUDIO INPUT
F
C
Front R Front L Center
Rear R Rear L Subwoofer
ANALOG 5.1CH AUDIO INPUT
Amplifier
(Receiver)
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio
/ video receiver that supports one or more of the
audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
Notes:
If the audio format of the digital output does not
•
match the capabilities of your receiver, the receiver
produces a strong, distorted sound or no sound at all.
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
• To see the audio format of the current DVD in the
on-screen display, press AUDIO.
Analog connection to a multi-channel A/V receiver
with 6 Channel connectors (Dolby Digital, DTS):
This DVD Player contains a multi-channel decoder.
This enables playback of DVDs recorded in Multi-
channel Surround without the need for an optional
decoder.
Make the appropriate Sound settings for Analog
Output and Speaker Settings in the setup menu. See
page 27.