Sharp PN-40TC1 Operation Manual page 27

■ AUDIO ( )
VOLUME
Adjusts the volume. Volume can also be adjusted using a remote control unit. (See page 18.)
AUDIO OUTPUT
Sets the volume of sound output from the audio output terminal.
VARIABLE1 ........ You can adjust the volume from the speakers of this monitor and the audio output terminal simultaneously
by using VOLUME.
VARIABLE2 ........ You can adjust the volume from the audio output terminal by using VOLUME.
Sound will not be output from the speakers of this monitor.
MUTE WITH FREEZE
Set whether or not audio turns off during freeze.
AUDIO SELECT (HDMI/DisplayPort/OPTION)
Selects the terminal used to input audio signals in each input mode.
RESET
Resets the values of the AUDIO menu items to the factory preset values.
Select ON and then press the ENTER button.
nSETUP ( )
LANGUAGE
Sets the display language for the menu screen.
RS-232C/LAN SELECT
Selects the method with which to control the monitor from the computer.
BAUD RATE
Selects the communication speed used for RS-232C communication.
LAN SETUP
Configures the settings to control the monitor from the computer via LAN. (See page 36.)
Crestron Connected
Select this when using a Crestron device. When this function is set to ON, the monitor can be controlled via network using
equipment and application software of Crestron Electronics, Inc.
This monitor supports application software RoomView from Crestron Electronics, Inc.
This is a function to connect a system developed by Crestron Electronics, Inc. which manages and controls multiple system
devices connected to the network.
For details of Crestron Connected, refer to the Crestron Electronics, Inc. website. (Provided only In English.)
http://www.crestron.com/
For the download of RoomView Express, refer to the Crestron Electronics, Inc. website. (Provided only In English.)
http://www.crestron.com/getroomview
USB PORT SELECTION
Specify the setting for the USB and touch panel connection when the input mode is changed to or from OPTION.
AUTO ..............The connection automatically changes when the input mode changes.
EXTERNAL .....The USB and touch panel connection is fixed at this monitor.
The touch panel and USB device cannot be used with the expansion slot device.
OPTION ..........The USB and touch panel connection is fixed at the expansion slot device.
The touch panel and USB device cannot be used with this monitor.
MANUAL .........When the input is changed,
Touch
If
INFORMATION
Displays monitor information. (See page 18.)
ALL RESET
Resets all the settings to the factory default settings. If the video is distorted after this is executed, turn off/on the main power.
(
( ) to change the connection.
( ) disappears, it will appear when the screen is touched.
) appears. (Approx. 5 seconds.)
Menu Items
27
E