8
www.electrolux.com
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Open the door. Remove all the items
from the drum.
4. Put the front polystyrene packaging
element on the floor behind the
appliance. Carefully put down the
appliance onto its rear side.
5. Remove the polystyrene protection
from the bottom.
6. Put the appliance back into an
upright position. Remove the power
supply cable and the drain hose from
the hose holder.
WARNING!
It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been
tested at the factory.
7. Remove the four transit bolts and pull
out the plastic spacers.
8. Put the plastic caps, that you find in
the user manual bag, in the holes.
1
2
2
1