Genius KYE Systems MLC-610B User Manual

MLC-610B User's Manual

1. Contents

- 2.4GHz Laser Mouse
- Nano Dongle
- Two AAA Battery
- Mouse Driver CD
- User's Manual

2. Hardware Installation

- Open the battery cover from the bottom case
- Take off the Nano Dongle from battery compartment
- Close the battery door
- Plug Nano dongle into PC USB port
- Turn on the power switch
- Keep Mouse close to dongle waiting 5~8 seconds for connecting action. (When device
connecting blue led will blinking, when device finished connecting blue led will turn off.)
- When PC screen show find new input device information then user can start use mouse

3. Driver Installation

Notice: The driver supports Windows 2000 XP and Vista
- Installation driver CD could be automatically
Recognized once plugged in. In case it doesn't work, please try below.
- Insert the driver CD → Double click "Setup.exe" and follow set-up instructions.
- A Mouse Setting icon will appear on the task bar.
- Setup step:
Driver Installation - MLC 610B
1. Double click "Setup.exe"
Follow set-up instructions
2. The InstallShield Wizard will install MLC 610B on your computer, click Next.