Table of Contents
Advertisement
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R]
*
3.0 m/10 ft
(appears when you
set [SURROUND]
to [YES] in the
[SIZE] setting.)
* When you perform the Quick Setup (page 20), the
default settings are changed.
** 0.0 to 6.9 meters for North American models.
Note
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range,
being the number).
recommended distance.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
0.0 dB
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
[SUBWOOFER]
0.0 dB
88
GB
Surround speaker distance from
the listening position can be set in
0.2 meter (1 ft) increments from
0.0 to 7.0 meters** (0 to 23 ft).
/
** m is displayed (**
indicates over the
indicates below.
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
Set this between –15.0 dB and
0.0 dB
+10.0 dB in 1.0 dB increments.
(appears when
you set
[SURROUND] to
[YES] in the
[SIZE] setting.)
To adjust the volume of all the
speakers at one time
Press VOLUME +/– on the system, or press
VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu appears.
2
Press X/x to select
then press
.
The options for [SETUP] appear.
3
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
4
Press X/x repeatedly to select
[SPEAKER SETUP], then press
c.
5
Press X/x repeatedly to select [TEST
TONE], then press
6
Press X/x repeatedly to select [ON],
then press
.
[SETUP],
or
or c.
Advertisement
Table of Contents
