Table of Contents
Advertisement
3
Pull the speaker cord out to a straight length of about 700 mm (28 inch). Fold back about
100 mm (4 inch) and twist together.
4
Draw the IR receiver cord first, and then the speaker cord through the hole on the base.
Stand the speaker up, and untwist and straighten out the speaker cord.
Bottom of the base
5
Secure the pedestal to the post with the screws.
10
GB
About 100 mm (4 inch)
IR receiver cord
,
Speaker cord
Screws with washer (long) (3)
(supplied)
Untwist and straighten out the speaker cord.
Advertisement
Table of Contents
