Rear Panel Connectors - Biostar Hi-Fi Z87W Setup Manual

Hi-Fi Z87W & Hi-Fi H87W
6x SATA 6.0Gb/s Connector
2x USB 2.0 Header (each header supports 2
USB 2.0 ports)
1x USB 3.0 Header (each header supports 2
USB 3.0 ports)
1x 8-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
Internal I/Os
4x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Clear CMOS Header
1x Consumer IR Header
1x Serial Port Header
1x S/PDIF out Connector
Form Factor ATX Form Factor, 305 mm x 220 mm
Windows 7/ 8
OS Support
Biostar reserves the right to add or remove support for any OS with or without notice.

1.4 Rear Panel Connectors

Note1: HDMI, DVI-D & VGA ports only work with an Intel® integrated Graphics Processor.
Note2: Maximum resolution:
HDMI: 4096 x 2160 @24Hz, compliant with HDMI 1.4a
DVI: 1920 x 1200 @60Hz
VGA: 1920 x 1200 @60Hz
Note3: The mainboard supports three onboard display outputs at same time.
Hi-Fi Z87W/Hi-Fi H87W/Hi-Fi B85W
Specifications
Hi-Fi B85W
4x SATA 6.0Gb/s Connector
2x SATA 3.0Gb/s Connector
2x USB 2.0 Header (each header
supports 2 USB 2.0 ports)
1x USB 3.0 Header (each header
supports 2 USB 3.0 ports)
1x 8-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
4x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Clear CMOS Header
1x Consumer IR Header
1x Serial Port Header
1x S/PDIF out Connector
3