Table of Contents
Advertisement
Internal VR Control
This section provides VR voltage control options.
PC Health Status
Reset Case Open Status
Disabled
Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled
Clears the record of previous chassis intrusion status and the Case Open
show "No" at next boot.
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
CPU/System Temperature
Displays current CPU/system temperature.
CPU/System Fan Speed
Displays current CPU/system fan speeds.
CPU/System Temperature Warning
Sets the warning threshold for CPU/system temperature. When temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
CPU/System Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)
CPU Fan Speed Control (CPU_FAN Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal
Allows the fan to run at different speeds according to the CPU temperature. You
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Silent
Allows the fan to run at slow speeds.
Manual
Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed
Allows the fan to run at full speeds.
Fan Speed Percentage
to Manual. Options are: 0.75 PWM value /
1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal
Allows the fan to run at different speeds according to the system temperature. You
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Silent
Allows the fan to run at slow speeds.
Manual
Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed
Allows the fan to run at full speeds.
Fan Speed Percentage
is set to Manual. Options are: 0.75 PWM value /
o
o
o
C/140
F, 70
C/158
o
o
C ~ 2.50 PWM value /
C.
1st System Fan Speed Control
o
o
C ~ 2.50 PWM value /
C.
- 24 -
o
o
o
o
o
F, 80
C/176
F, 90
C/194
CPU Fan Speed Control is set
F.
Advertisement
Table of Contents
