Controlling Other Devices Through Cec; Restarting The Tv - Magnavox 43MV349R Owner's Manual

Controlling other devices through CEC

Consumer Electronics Control (CEC) enables your TV and other
CEC-compatible home entertainment devices to control one
another in various ways. First, the CEC-compatible devices must
"discover" one another and report their capabilities. After this, one
device can control another according to the features you enable.
For example, playing a disc on a Blu-ray
™
TV to the Blu-ray player's input. Or, powering off the TV could also
™
power off the Blu-ray player and the home theater receiver.
Discover connected CEC devices
To discover CEC devices:
1
Make sure that your CEC-compatible devices are connected
to the TV with a suitable High Speed HDMI
®
supports HDMI ARC and CEC control.
2
Turn on each device and make sure all devices are CEC
enabled.
Tip(s)
Some manufacturers have their own branded names for CEC
●
functionality, so you might need to read the product
documentation to correctly identify the CEC features of the
device.
3
On the TV's Home screen menu, navigate to Settings >
System > Control other devices (CEC) and then select Search
for CEC devices. Press OK to repeat the discovery process, if
necessary.
When finished, the TV displays a list of CEC devices that are
®
connected to each HDMI input, as well as any devices that had
previously been connected. The TV remembers the names of
multiple CEC devices even when they are no longer connected. If
the list is longer than the allowed space, press A to see a
complete list in a scrollable window.
®
Enable HDMI ARC
®
HDMI ARC is the audio return channel that is available on one of
®
the TV's HDMI ports. The audio return channel enables you to
send a Dolby Audio ™ signal back to a home theater receiver that
is also sending an audio and video signal into the TV. Using
®
HDMI ARC reduces the number of cables needed and optionally
lets you control the volume and mute state of the receiver by
enabling system audio control.
®
HDMI ARC is disabled by default.To enable or disable system
audio control, in the Home screen menu, navigate to Settings >
System > Control other devices (CEC) and highlight System audio
control. Press OK to enable or disable the feature.
Note(s)
Enabling HDMI ARC also enables System audio control. After enabling HDMI
●
ARC, you can disable System audio control if you prefer.
™ player could switch the
®
Cable that
Enable system audio control
System audio control enables the TV remote to change the volume
and mute state of an amplifier or sound bar connected through
®
HDMI , and to display the external device's volume and mute
status in the TV's on-screen display.
The TV automatically turns off its internal speakers and sends
volume and mute control signals to an external amplifier when all
of the following are true:
System audio control is enabled on the TV.
●
The TV is connected to a CEC-compatible amplifier, it is powered
●
on, and CEC discoverability is enabled.
The CEC-compatible amplifier's HDMI
●
connected to the TV's HDMI ARC connector with a suitable
®
HDMI cable.
When the CEC-compatible amplifier is off, the TV automatically
turns on its speakers (unless you have turned them off as
described in Turning off the TV speakers for home theater use L
p. 54) and resumes local control of volume and mute state.
To enable or disable system audio control, in the Home screen
menu, navigate to Settings > System > Control other devices (CEC)
and highlight System audio control. Press OK to enable or disable
the feature.
Enable 1-touch play
1-touch play enables a device to control which TV input is active.
For example, pressing Play on your Blu-ray
™
TV to the Blu-ray input.
1-touch play is disabled by default. To enable 1-touch play, in the
Home screen menu, navigate to Settings > System > Control other
devices (CEC) and highlight 1-touch play. Press OK to enable or
disable the feature.
Enable system standby
The system standby feature causes other devices to power off
when you power off your TV. Depending on the CEC System
Standby implementation, it also might enable connected devices
to power off your TV when you power off the device.
System standby is disabled by default. To enable system standby,
in the Home screen menu, navigate to Settings > System > Control
other devices (CEC) and highlight System standby. Press OK to
enable or disable the feature.

Restarting the TV

You can restart the TV when necessary. Restarting has the same
effect as unplugging the TV power and then plugging it in again.
To restart the TV, navigate to Settings > System > Power, and then
select System restart. Highlight Restart, and then press OK to
confirm restart.
While the TV restarts, the screen goes dark for a few seconds, and
then displays the startup screen for a few more seconds. When
the restart operation completes, the TV displays the activity you
selected in Power on settings L p. 46.
55 .
English
®
ARC connector is
™
player switches the