Table of Contents
Advertisement
Adjusting settings while watching a show
Press A to display the Options menu (except when you are viewing
the program information banner). Press the Up and Down arrows
to highlight an option, and then press the Left and Right arrows
to change the setting. The topic Adjusting TV settings L p. 35
explains each of the settings in detail.
Pausing Live TV
Live TV Pause gives your Roku TV the ability to pause, play, fast
forward, and rewind digital Antenna TV. You can pause Antenna
TV for up to 90 minutes.
Requirements
To use this feature, you need to:
1
Connect your TV to the Internet. If you didn't connect during
Guided Setup, see What if I didn't connect my TV? L p. 22.
2
Provide your own dedicated USB drive with the following
minimum specifications.
16 GB
●
15 Mbps read/write speed
●
USB 2.0 compliant
●
A USB flash drive (thumb drive) meeting the minimum
requirements is highly recommended. Note that using a larger
drive does not extend the 90 minute pause time.
IMPORTANT: After warning you and giving you a chance to
cancel Live TV Pause setup, all existing content on your USB
drive is erased when you enable this feature.
3
Connect your USB drive to the TV's USB port.
IMPORTANT : Some TV models have more than one USB port.
You can connect your Live TV Pause USB drive to any port,
but make sure that nothing is connected to other USB ports
while enabling Live TV Pause. Reconnect other USB devices
after you have finished enabling Live TV Pause.
4
Enable Live TV Pause, as explained in the following topic.
Enabling Live TV Pause
You can start setting up Live TV Pause in any of the following ways:
Go to Settings > TV inputs > Antenna TV > Live TV Pause, and
●
then select Enable.
After completing a channel scan, select Set up Live TV Pause
●
from the available options.
Press Play/Pause on the Roku remote while watching a digital
●
Antenna TV channel.
Highlight the Antenna TV tile on the Home screen, press A on
●
the remote, and then select Enable Live TV Pause.
After starting setup of Live TV Pause in any of these ways, the TV
prompts you through the steps needed to enable this feature.
Setup takes only a few moments.
Note(s)
Use of a USB hub is not supported.
●
Using Live TV Pause
If you have used the Roku remote to watch streaming channels,
using Live TV Pause should be very familiar to you.
While watching a digital Antenna TV channel, press Play/Pause
●
to pause or play the content. After the TV program has been
paused for 90 minutes, the TV resumes playing.
After watching a channel for a while, press Rewind to jump back
●
up to the point where you first started watching the channel, up
to 90 minutes.
After pausing or rewinding, press Fast forward to jump ahead up
●
to the point where you are once again watching the live TV
program.
Press Fast forward or Rewind repeatedly to cycle through 1x, 2x,
●
and 3x skip speeds. Press Instant replay C to play back the last
several seconds of the program.
When the program is paused, press the Left and Right arrows
●
to move forward and backward through the program
approximately 10 seconds per press. Small frames appear
across the screen to identify your location in the program.
Note(s)
If the C button is not available on your remote, you can use the Roku
●
mobile app. For more information, see Getting and using the Roku mobile
app L p. 59.
Whenever you use any of the Live TV Pause features, the TV
momentarily displays a progress bar:
Time at current playback position.
1
Current playback position
2
Extent of pause time, representing the amount of time this
3
channel has been buffered, up to 90 minutes.
90 minute mark, representing the maximum extent of pause
4
time.
Current time.
5
The progress bar also displays tick marks at each half hour point,
to help you locate the boundaries where one show ends and a new
one begins.
29
.
English
Advertisement
Table of Contents
