Sony BRAVIA KD-75Z9F Reference Manual page 13

2
Remove the screws from the rear of the TV.
3
Attach the Wall-Mount Attachment (supplied with the TV) to the rear of the TV (to make it
parallel with the wall).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount Attachment when attaching them to the TV. Use only a flat head screwdriver to
install the Wall-Mount Attachment. Use of another tool might result in over torqueing the Wall-Mount
Attachment and damaging the TV.
VS
1.5 N∙m {15 kgf∙cm}
13
GB