Table of Contents
Advertisement
1.4
Allowed environmental conditions
To ensure the correct operation of the separator, it must be protected against any inclement weather
conditions (rain, hail, snow, fog, etc.). Only use in temperatures of 41°F to 113°F with a relative humidity
less than 70%. The work environment must be tidy, well-lit, and devoid of explosive atmosphere.
Attention!
Workers exposed to sound pressure levels above 85 dB (A) must be protected by special individual
protection devices.
It is therefore necessary, if such working conditions exist, to provide workers with such approved
individual protection devices and to inform them of the risks relating to noise exposure.
1.5
Storage
Remove the filter and clean it, empty the container and store the separator in a place protected against
atmospheric agents with a temperature between 32°F and 104°F. Cover with a nylon sheet to prevent
accumulation of dust.
1.6
Scrapping
In case of scrapping, all the component parts of the separator will have to be disposed of through adequate
disposal channels in accordance with applicable legislation.
Before scrapping, all plastic and rubber parts will have to be separated from the electrical material. Parts
made of plastic, aluminium and steel only may be recycled if collected by special centers.
- 5 -
Information
Advertisement
Table of Contents
