Advertisement

Quick Links

DLS3000 SEPARATOR
INSTRUCTION MANUAL
Read this manual carefully before using the dust collector
402547 Rev D

Advertisement

Table of Contents
loading

Summary of Contents for National Flooring Equipment DLS3000

  • Page 1 DLS3000 SEPARATOR INSTRUCTION MANUAL Read this manual carefully before using the dust collector 402547 Rev D...
  • Page 2 This manual should be considered an integral part of the separator and must be kept together with the unit until this is scrapped. In case of loss of or damage to the manual, ask National Flooring Equipment (NFE) for a new copy.
  • Page 3: Table Of Contents

    Information Information Identification of main parts Identification of manufacturer Service parts Allowed environmental conditions Storage Scrapping Warranty Safety Safety details Installation Handling Installation Operation Work cycle Removal and placing of the waste bag - 2 -...
  • Page 4: Information

    Information Identification of main parts 1. Cover 2. Release fastening 3. Inlet 4. Longopac system 5. Castors 6. Fixed wheels 7. Longopac system release lever 8. Push handle 9. Outlet - 3 -...
  • Page 5: Identification Of Manufacturer

    Information Identification details of manufacturer National Flooring Equipment 9250 Xylon Avenue N Minneapolis, MN 55445 Tel. (800) 245-0267 Fax. (800) 535-8255 nationalequipment.com info@nationalequipment.com Service Parts Part Number Description 402479 Gasket, Filter Chamber 402485 Gasket, Container, Cut to Length 402533 Hose, Antistatic, 76mm, 5m without Cuffs...
  • Page 6: Allowed Environmental Conditions

    Information Allowed environmental conditions To ensure the correct operation of the separator, it must be protected against any inclement weather conditions (rain, hail, snow, fog, etc.). Only use in temperatures of 41°F to 113°F with a relative humidity less than 70%. The work environment must be tidy, well-lit, and devoid of explosive atmosphere. Attention! Workers exposed to sound pressure levels above 85 dB (A) must be protected by special individual protection devices.
  • Page 7: Warranty

    Information Warranty National Flooring Equipment Inc. (referred to as “the Company”) warrants that each new unit manufactured by The Company, to be free from defects in material and workmanship in normal use and service for a period of twelve (12) months from date of shipment from the Company. For administrative ease, will honor warranty for a period of fifteen (15) months from date of shipment from the company.
  • Page 8: Safety

    Safety Safety details The person in charge of safety shall be responsible for informing workers about the risks associated with operation. The obligation also exists of training workers so they are able to protect themselves and others. Failure to observe basic safety regulations and warnings could cause accidents during operation, maintenance, and repair.
  • Page 9: Handling

    Installation Handling The machine is supplied in a strong cardboard box secured with straps. Transport the package using a fork-lift truck of adequate lifting capacity and make sure it is stable and that weight is properly distributed on the forks. Before starting to move, make sure the transit area is free and that there are no moving objects on the packaging.
  • Page 10 Installation Installation Warning! Before installing the pre-separator, carefully make a sight check to pinpoint any damage suffered during transport. In the event of any component parts being damaged, do not proceed with installation. Notify the manufacturer and reach an agreement on how to proceed. Fit the equipment or accessory required for the type of collecting operation on the opposite end of the hose.
  • Page 11: Operation

    Operation Work cycle  Make sure the flexible hose is properly fitted and locked in the pipe union.  Lock the wheels by means of the retainer provided. - 10 -...
  • Page 12 Operation To move the pre-separator, use the handle on the back. Warning! The separator can be moved only on flat ground! If the separator is moved on inclined grounds, there is a risk of loss of control, which could cause damage to persons or things.
  • Page 13: Removal And Placing Of The Waste Bag

    Operation Removal and placing of the waste bag Stop the dust collector motors by pressing the relevant STOP buttons. Warning! Disconnect the plug from the power socket. Use two ties to fasten the collection bag at two points (about 1.2-2” or 3-5 cm from each other), just ...
  • Page 14 9250 Xylon Avenue N • Minneapolis, MN 55445 • U.S.A. Toll-free 800-245-0267 • Phone 763-315-5300 • Fax 800-648-7124 • Fax 763-535-8255 Web Site: www.nationalequipment.com • E-Mail: info@nationalequipment.com...

Table of Contents