Table of Contents
Advertisement
Quick Links
INTEX
FastFill™ Airbed with 2-step battery inflation system
Model I638AA 4AA Cell Size Batteries 6V
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
• Never introduce any flammable substance into the inflatable airbed, SUCH AS AEROSOL TIRE
REPAIR PRODUCTS, as it may ignite or explode.
• This is not a toy. Children must not be left unattended when using the airbed.
• Keep the storage bag (if included) away from babies and children. The storage bag is not a toy.
When not in use, fold the bag and put it away out of the reach of children.
• Do not walk, stand on or jump on or use the airbed as a trampoline.
• Do not use on or near water. This is not a raft.
• Do not set up bed near stairs, doors, sharp edges or breakable objects. Provide adequate space
between bed and objects to avoid entrapment.
• Make sure the area is flat, smooth, even and free of sharp objects that could puncture the bed.
• Keep pets away from the airbed. Pets may puncture the surface of the bed.
• Avoid sleeping on the edge of the airbed. Edges produce less support than the middle of the bed.
• Do not operate air pump for more than 5 minutes at a time. Let pump cool at least 15 minutes
between use.
• Do not obstruct the air passage opening or insert any objects into the air passage opening.
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
• Do not dispose of the batteries in regular trash, municipal waste stream or by fire as battery may
leak or explode. Always dispose of the batteries safely in accordance with your local law and
regulations.
• Never recharge non-rechargeable batteries.
• Do not short-circuit the terminals of the battery or rechargeable battery.
FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID SUFFOCATION, PROPERTY
DAMAGE, ELECTRIC SHOCK, BURNS OR OTHER INJURY.
©2021 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp. All rights reserved/Tous droits réservés/Todos los derechos
reservados/Alle Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/
à/a/an Intex Development Co. Ltd., Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European
Union by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V.,
Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
SAVE THESE INSTRUCTIONS
OWNER'S MANUAL
®
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Page 1
(38IO) 638AA AIRBED ENGLISH 4.875" X 7.25" 06/28/2021
English
38IO
038-*IO-R0-2207
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Intex 164783
Summary of Contents for Intex 164783
- Page 1 FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID SUFFOCATION, PROPERTY DAMAGE, ELECTRIC SHOCK, BURNS OR OTHER INJURY. ©2021 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp. All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
- Page 2 In no event shall Intex, their authorized agents or employees be liable for damages (such as pin holes) to the airbed caused by negligence, ordinary wear and tear, abuse and carelessness, or external forces.
- Page 3 6. Power switch 7. Built-in pressure adjuster cap (Part number: #13142) NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale. Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual, without notice. BATTERY INSTALLATION 1. Unfold the airbed and open the electric air pump cover (3) to reveal the electric air pump (2). See Fig (1).
- Page 4 (38IO) 638AA AIRBED ENGLISH 4.875” X 7.25” 06/28/2021 English 38IO INFLATION USING THE ELECTRIC AIR PUMP AND TOP OFF THE FIRMNESS WITH THE BUILT-IN PRESSURE ADJUSTER NOTE: The electric pump is a low pressure inflator. Start by inflating the airbed using the electric air pump until the sides are up and then use the built-in pressure adjuster to reach your desired firmness. 1. Locate the built-in pressure adjuster and unscrew the cap (7). See Fig (5). 2. Make sure the manual inflation port cap (4) on the electric air pump cover (3) is closed by pushing in firmly. See Fig (6).
- Page 5 (38IO) 638AA AIRBED ENGLISH 4.875” X 7.25” 06/28/2021 English 38IO 5. Top off with hands or foot, whichever is more convenient. Place your hands or foot directly over the pressure adjuster valve opening, covering the opening completely, and press down firmly. This will push air from the air pump chamber into the bed. See Fig (9). 6. Remove your hands or foot so the air pump chamber will re-fill with air for the next cycle. See Fig (10). 7. Repeat until the desired firmness is achieved. 8. Replace the built-in pressure adjuster cap (7). MANUAL INFLATION OPTION A conventional external foot, manual or electric operated air pump (not included) can be used by connecting it to the manual inflation port located on the electric air pump cover (3). See Fig (11). Follow these steps: 1. Unscrew the built-in pressure adjuster cap (7).
- Page 6 (38IO) 638AA AIRBED ENGLISH 4.875” X 7.25” 06/28/2021 English 38IO POWER DEFLATION 1. Open the air pump cover (3) and remove the electric air pump (2) from the airbed. The open port will start deflating the airbed naturally. See Fig (12). 2. Switch ON the pump by pressing “I” and reattach it to the airbed in the reverse direction: With the power switch facing the airbed, align the arrow on the pump rim with the arrow on the pump holder frame and turn pump clockwise to lock in place. The pump is only slightly recessed with the pump body sticking out of the airbed for deflation. See Fig (13). 12 1 2 Alignment arrow Airbed 3.
- Page 7 (38IO) 638AA AIRBED ENGLISH 4.875” X 7.25” 06/28/2021 STORAGE INSTRUCTIONS English 38IO 1. Deflate the airbed following the “DEFLATION” instructions. 2. Make sure the airbed is clean and dry. 3. Lay the airbed flat with the sleeping surface facing upwards and follow the folding steps on Figs (15 - 19). Fold the airbed loosely and avoid sharp bends, corners and creases which can damage the airbed. FIG (15) FIG (19) FIG (17) FIG (18) FIG (16) 4. Place the airbed inside the storage bag (if included) or the original packaging and store in a dry place. TROUBLESHOOTING GUIDE PROBLEM CAUSE SOLUTION...
Need help?
Do you have a question about the 164783 and is the answer not in the manual?
Questions and answers