Canon PIXMA G600 Series Online Manual page 276

Aligning the Print Head
Note
• If the problem is not resolved after performing the print head alignment, perform print head alignment •
manually from your computer.
For Windows:
Adjusting Print Head Position Manually
When using paper with one printable surface, check the correct printable side
Check6
of the paper.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
When you load paper on the rear tray, load paper with the printable side facing up.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
• When copying, see also the sections below: •
Is platen glass dirty?
Check7
Clean the platen glass.
Cleaning Platen and Document Cover
Make sure original is properly loaded on platen.
Check8
When you load the original on the platen, load it with the side to be copied facing down.
Loading Originals
Is copy source a printed paper by printer?
Check9
If you use a printout done by this printer as the original, print quality may be reduced depending on the
condition of the original.
Reprint from the computer if you can reprint from it.
Note
• Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check
pattern is printed correctly.
276