Advertisement
Wired/Wireless IP Camera – Models XX34A and XX41A
Introduction
You can access your camera's live video feed from your web browser or through software on your computer, your tablet, or
your smart phone.
To access your camera via Ethernet, to your desktop computer - Follow steps 1 – 3.
To access your camera via Wi-Fi, to your notebook via Wi-Fi and cell-phone via Wi-Fi - Follow steps 1 – 4.
To access your camera via W-Fi, to cell-phone via 3G/4G and computer over the Internet - Follow steps 1- 4 and then see the
full owner's manual for dynamic DNS and port forwarding.
Once you have your camera configured, you may access your camera by either of these methods:
1. Use the ipcamsetup program on the included CD and click on your camera.
2. Once you are viewing your camera's live video, you can save the web address as a favorite. Then you can use that saved
favorite without using the ipcamsetup program each time.
3. In your web browser, type the IP address of your camera as a new web address.
4. To use a friendly name like 'mylivingroom.dyndyns.org', see the owner's manual for how to configure your camera to use
Dynamic DNS.
5. To see your camera over the Internet, or from a cell phone through a 3G/4G connection, see your owner's manual to
configure your router for Port Forwarding.
Quick Installation Guide
(Using IE Browser)
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Airsight XX34A
Summary of Contents for Airsight XX34A
- Page 1 Wired/Wireless IP Camera – Models XX34A and XX41A Quick Installation Guide (Using IE Browser) Introduction You can access your camera's live video feed from your web browser or through software on your computer, your tablet, or your smart phone.
- Page 2 Step 1: Hardware Installation You need to set up your camera using a network cable (wired) first before you attempt to use it wirelessly. 1. Install the Wi-Fi antenna. 2. Plug the power adaptor into the camera and into an AC outlet. 3.
- Page 3 Step 3: Real-time Video Demonstration 1. Login: Double click “IP Camera Tool” icon on your desktop, look for the IP address, choose the one for your camera, double click to go to IE login interface. Default username: admin Password: no password 2.
- Page 4 Note: If there is no picture shown in IE Browser If using IE browser to connect to the camera for the first time, and there is no image displayed, there will be an ActiveX prompt, please click the prompt and choose Run Add-on, refresh the IE browser, and login to the camera again, then you will see live video.
- Page 5 If there is still no live video after you run ActiveX, please try to enable the ActiveX options of IE security settings, please do the follow steps: 1. Close your computer’s Firewall. 2. Change the ActiveX settings, open “IE” browser and select “Tools” > “Internet Options” > “Security”> “Custom Level”...
- Page 6 Step 4: How to use your camera Wirelessly You should set up your camera using a network cable (wired) first before you attempt to use it wirelessly. (See Hardware Installation). 1. Make sure your router is a wireless router. 2.
Need help?
Do you have a question about the XX34A and is the answer not in the manual?
Questions and answers