Related Manuals for LG 47LB5610.AHK
Summary of Contents for LG 47LB5610.AHK
- Page 1 OWNER’S MANUAL LED TV *LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your set and retain it for future reference. LB56** www.lg.com...
-
Page 2: Open Source Software Notice
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Make sure to connect Mains cable y Do not place the TV and/or remote control to compliant AC mains socket with in the following environments: Grounded earth pin. - Page 4 SAFETY INSTRUCTIONS y When mounting TV onto wall make sure y Dispose of used batteries carefully to neatly install and isolate cabling from to ensure that a small child does not rear of TV as to not create possibility of consume them.
- Page 5 SAFETY INSTRUCTIONS y Do not allow any impact, shock or any y Unplug the TV from AC mains wall socket objects to fall into the unit, and do not if you do not intend to use the TV for a drop anything onto the screen.
- Page 6 SAFETY INSTRUCTIONS y If you install the TV on a stand, you need y Do not place non-rechargeable batteries to take actions to prevent the product in charging device. from overturning. Otherwise, the product may fall over, which may cause injury. y Make sure there are no objects between the remote control and its sensor.
- Page 7 SAFETY INSTRUCTIONS y Take care not to touch the ventilation y When cleaning the product and its openings when watching the TV for long components, unplug the power first periods as the ventilation openings may and wipe it with a soft cloth. Applying become hot.
- Page 8 SAFETY INSTRUCTIONS y Contact the service centre once a year to y You may find different brightness and clean the internal parts of the product. colour of the panel depending on your Accumulated dust can cause mechanical viewing position(left/right/top/down). failure. This phenomenon occurs due to the characteristic of the panel.
-
Page 9: Assembling And Preparing
ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. - Page 10 ASSEMBLING AND PREPARING Remote control, Owner’s manual Cable Holder batteries (AAA) Power Cord Stand Screws Stand Screws 4EA, M4 x L14 4EA, M4 x L20 (Only 42/47LB56**) (Only 32LB56**) Cable Managements Wall mount spacers Stand Bases (Only 42LB56**)
-
Page 11: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Screen Joystick button ( *This button is located below the TV screen.) Speakers Remote control sensor Power Indicator NOTE y You can set the power indicator light to on or off by selecting OPTION in the main menus. Using the Joystick button You can simply operate the TV functions, by pressing to turn ON/OFF or sliding your finger over joystick button moving up, down, left or right. -
Page 12: Adjusting The Menu
ASSEMBLING AND PREPARING NOTE y When your finger is over the joystick button and you are sliding finger forward/back ,left or right, be careful not to press down to hard on joystick. If you press the joystick button first, you may not be able to adjust the volume level and saved programmes. -
Page 13: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV y When transporting a large TV, there should be at least 2 people. Please note the following advice to prevent the y When transporting the TV by hand, hold the TV from being scratched or damaged and for TV as shown in the following illustration. -
Page 14: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV Mounting on a table Lift and tilt the TV into its upright position on a table. Image shown may differ from your TV. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Attaching the stand A stand base 10 cm... -
Page 15: Mounting On A Wall
We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 16: Making Connections
For more information of external device’s Use an authorized LG wall mount and connection, refer to the manual provided with contact the local dealer or qualified each device. -
Page 17: Antenna Connection
MAKING CONNECTIONS Antenna Connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). VHF Antenna ANTENNA UHF Antenna Antenna ANTENNA Coaxial (75Ω) (*Not Provided) Wall Jack CABLE Coaxial (75Ω) (*Not Provided) NOTE CABLE y Use a signal splitter to use more than 2 TVs. -
Page 18: Other Connections
MAKING CONNECTIONS Other Connections Connect your TV to external devices. For the best picture and audio quality, Connect the external device and the TV with the HDMI cable as shown. Some separate cable is not provided. CABLE ANTENNA OPTICAL DIGITAL AUDIO OUT GREEN HDMI... - Page 19 MAKING CONNECTIONS MHL passive cable Mobile phone (Only the MHL- enabled phone)
-
Page 20: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. -
Page 21: Automatically Setting Up Programme
SETTINGS SETTINGS Expert : Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This is the Automatically Setting Up Programme adjustment menu provided for ISF-certified picture tuning professionals. (ISF logo can SETTINGS SETUP Auto Tuning only be used on ISF-certified TVs.) ISFccc: Imaging Science Foundation Automatically tunes the programmes. - Page 22 SETTINGS To use TruMotion y Colour Temperature : Adjusts the overall tone of the screen as desired. In Expert SETTINGS PICTURE TruMotion mode, detailed fine-tuning can be set via Gamma method, etc. [Depending on model] y Colour Management System : This is Corrects images to display smoother motion a system that experts use when they sequences.
-
Page 23: To Use Simplink
This function is only compatible with devices the optical digital audio output port. LG audio with the SIMPLINK logo. device allows you to enjoy rich powerful sound y To use the SIMPLINK function, you need to easily. - Page 24 SETTINGS To remove the USB device y If a third-party device with the HDMI-CEC function is also used, the SIMPLINK device Q.MENU USB Device may not work normally. y [Depending on model] Select a USB storage device that you want to If you select or play media from a the remove.
-
Page 25: Supported Video Formats
SETTINGS My Media supporting file y .mpg, .mpeg, .mpe [Video] MPEG-1, MPEG-2 y Maximum data transfer rate : 20 Mbps (Mega [Audio] MPEG-1 Layer I, MPEG-1 Layer II, bit per second) Dolby Digital, LPCM y External supported subtitle formats y dat : *.srt (SubRip), *.smi (SAMI), *.sub [Video] MPEG-1, MPEG-2 (SubViewer, MicroDVD, DVDsubtitleSystem,... -
Page 26: Supported Photo Formats
BMP and PNG format files may be slower to display than JPEG. TO SEE WEB MANUAL To obtain detailed User Guide information, please visit www.lg.com. EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup infor- mation, please visit www.lg.com. -
Page 27: Maintenance & Troubleshooting
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 28: Specifications
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 32LB56** 42LB56** 47LB56** MODELS 32LB5610-CD 42LB5610-CD 47LB5610-CD Dimensions With stand (mm) 732 x 481 x 207 961 x 610 x 218 1073 x 676 x 255... - Page 29 SPECIFICATIONS HDMI-DTV supported mode HDMI-PC supported mode (Use HDMI IN 1 for PC mode) Horizontal Vertical Resolution Frequency Frequency Horizontal Vertical (kHz) (Hz) Resolution Frequency Frequency (kHz) (Hz) 31.469 59.94 720 x 480 31.5 640 x 350 31.468 70.09 720 x 576 31.25 720 x 400 31.469...
- Page 32 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
-
Page 33: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 34: Key Codes
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... -
Page 35: Usb To Serial Converter With Usb Cable
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. -
Page 36: Customer Computer
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &... -
Page 37: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 38: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 39 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 40 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 41 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 42 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 43 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 44 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...