Table of Contents
Advertisement
11) Allow the unit to cycle on. Press and hold the actuator paddle. CB yellow "BC OPEN"
LED turns on and the unit shuts down according to the chart above. If not, replace CB.
12) Turn off the power supply.
13) If BC assembly was removed, replace BC assembly in its correct position.
14) Replace the control box cover in its correct position.
15) Replace the panels in their correct positions.
16) Turn on the power supply to start the automatic icemaking process.
Legend: BC–bin control; CB–control board
Bin Control
Extension Bracket
Bin Control Insulation
Bin Control Cover
Bin Control Extension Bracket
Bin Control
Bin Control Cable
Actuator Paddle
Fig. 1
Bin Control
Proximity
Switch Closed
(calling for ice)
Fig. 2
23
Bin Control Proximity
Switch Open
(bin full, unit off or
shutting down)
Advertisement
Table of Contents
