Fig. 19: Ce Foot Contact Surface; Fig. 20: Te Foot: Handling Of Cup Spring Contact Surface / Foot Contact Surface - ABB HT605590 Operation Manual

Operation Manual / A170-M.. - A175-M..
3 Removal and installation / 3.3 Installing the turbocharger
Fixing clamping nuts
Fig. 19: CE foot contact surface
Tighten clamping nuts on compressor end (CE) (see
u
Fig. 20: TE foot: Handling of cup spring contact surface / foot contact surface
Grease the contact surface (F) for the cup springs (X)
u
sion and strength class →34)
grease.
Tighten clamping nuts on turbine end (TE) (see
u
© Copyright 2021 ABB. All rights reserved.
on the foot of the turbine end (TE) with high-temperature
Tightening the clamping nut
HZTL4033_EN
Tightening the clamping nut
(see Table 5: Foot screws, dimen-
Rev.H
→36).
→36).
July 2021