Table 41: Tightening Torque (86505) - ABB HT605590 Operation Manual

Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.9 Installing the cartridge group
Product
A170-M
A175-M
Table 41: Tightening torque (86505)
1. Screw in and tighten speed sensor (86505) with new O-ring (86506).
2. Insert cable connector (86515).
CAUTION
Oil orifices
There is an orifice for adjusting the oil pressure in each of the two oil supply
pipes of the bearing casing. When the cartridge group, the bearing casing or
the turbocharger-is being fitted to the engine, it must be ensured that the
orifices specified for the turbocharger are installed in both oil supply pipes.
Check that the oil orifices have been correctly installed.
u
Remove temporary covers on oil connections.
u
Fit all oil pipes according to instructions of enginebuilder.
u
Version with compressor wheel cooling
Fit air supply line (see Compressor wheel cooling).
u
© Copyright 2021 ABB. All rights reserved.
Size
M18x1.5
M18x1.5
HZTL4033_EN
Tightening torque [Nm]
150
150
Rev.H July 2021