Leveling - LG WD-P1410RD6 Owner's Manual

Installation
I

Leveling

Raise
Lock
Nut
NOTE
• If the washing machine is installed on a raised platform, it must be securely fastened in
order to eliminate the risk of falling off.
1. Leveling the washing machine properly
2. If the floor is uneven, turn the adjustable feet
Lower
• Once the washer is level, tighten the lock
Tighten all 4
locknuts securely
• Diagonal Check
prevents excessive noise and vibration.
Install the appliance on a solid and level
floor surface, preferably in a corner of the
room.
NOTE
• Timber or suspended type flooring
may contribute to excessive
vibration and unbalance.
as required. (do not insert pieces of wood
etc. under the feet)
Make sure that all four feet are stable and
resting on the floor and then check that the
appliance is perfectly level. (use a spirit
level)
nuts up towards the base of the washer.
All lock nuts must be tightened.
When pushing down the edges of the
washing machine top plate diagonally,
the machine should not move up and down
at all (Please, check both directions). If
machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
15