Axis M4206-LV User Manual page 12

AXIS M42 Network Camera Series
Additional settings
1. Go to Settings > Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
4. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Monitor long and narrow areas
Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel.
1. Depending on your device, turn the camera or the 3-axis lens in the camera 90° or 270°.
Note
Make sure to aim IR LEDs away from walls or weathershields.
2. If the device doesn't have automatic rotation of the view, log in to the webpage and go to Settings > System > Orientation.
3. Click
4. Rotate the view 90° or 270°.
Find out more at axis.com/axis-corridor-format.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize the face of a person, you can use the
pixel counter.
.
12