Appendix; Troubleshooting - LG M2262DP Owner's Manual

APPENDIX

TROUBLESHOOTING

The operation does not work normally.
The remote control
doesn't work
Power is suddenly
turned off
The video function does not work.
No picture &No sound
Picture appears slowly
after switching on
No color, poor colour,
or poor picture
Horizontal / vertical bars
or picture shaking
■ Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the set.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR, etc.
■ Install new batteries.
■ Is the sleep timer set?
■ Check the power control settings. Power interrupted.
■ If the TV is switched on and there is no input signal, it will switch off
automatically after 15 minutes to save the power consumption.
■ When a broken file was played in the USB mode, the TV may turn off.
Please check the file in your usb storage.
■ Except the screen off mode of the energy saving menu.
■ Check whether the product is turned on.
■ Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product's power cord into the
outlet where the product's power cord was plugged in.
■ This is normal, the image is muted during the product startup process.
Please contact your service centre, if the picture has not appeared
after five minutes.
■ Adjust Colour in menu option.
■ Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■ Check for local interference such as an electrical appliance or power
tool.
133