Table of Contents
Advertisement
Connections
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker. (HT-E353K/355K
Only)
2. Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.(HT-E353K/355K Only)
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
Connecting the wall mount
1. Connect the speaker cord with the colour
tube to (+), and the speaker cord without the
colour tube to (–).
2. Prepare screws (not supplied) that are suitable
for the hole on the back of each speaker.
See the illustrations below.
3. Fasten the screws to the wall, then hang the
speaker on the wall.
In case of HT-E350K
Front Speaker (R)
Surround Speaker (R)
* Refer to page 14 for the speakers of HT-E353K/E353HK/E355K.
16
English
8 to 10 mm
Depth of fastened screw
SPEAKERS OUT
FRONT
CENTER
FRONT
SURROUND
SUBWOOFER
SURROUND
FA NET
(Only For Service)
SPEAKER IMPEDANCE : 3
Colour tube
Front left speaker (L) : White
Front right speaker (R) : Red
Center speaker : Green
Surround left speaker (L) : Blue
Surround right speaker (R) : Gray
4 mm
30 mm
Hole on the back of the speaker
Center Speaker
Front Speaker (L)
AUX
IN
FM ANT
HDMI OUT
VIDEO OUT
Surround Speaker (L)
Subwoofer
Black
Red
5 mm
10 mm
Advertisement
Table of Contents
