Samsung HW-MM36 Full Manual page 16

3. Turn off the Soundbar using the Soundbar's remote control or by pressing the
the main Soundbar unit.
4. Press and hold the VOL button on the remote control for at least 5 seconds.
• The ID SET message appears on the display of the Soundbar for a moment, and then disappears.
5 Sec
CAUTION
• If your Soundbar was playing music when it connects to the SWA-8500S, you may hear some
stuttering from the woofer as the connection finalizes.
5. Turn on the Soundbar using the Soundbar's remote control or by pressing the
the main Soundbar unit.
6. Check if the LINK LED is solid blue (connection complete)
STANDBY
STANDBY
LINK
OFF
ON
LINK
Blue is On
ID SET
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Receiver Module.
ENG - 10
(Power) button on
(Power) button on