Table of Contents
Advertisement
TH-49_55_65LX900Z_Eng_TQB4GA0066.book 21 ページ ２０２２年１月２４日 月曜日 午後５時３３分
Indicator / Control panel
When pressing 4, 5, 6 buttons, the control panel guide
≥
appears on the right side of the screen for 3 seconds
to highlight which button has been pressed.
1
2, 3
Rear side of the TV
1 Power LED
Red:
Standby
Green:
On
• Depending on the ambient brightness,
adjusts the brightness of LED to easy-
to-view levels automatically.
Orange: Standby with some functions (recording,
etc.) active
The LED blinks when an infrared signal is received
≥
from the remote control.
2 Ambient sensor
≥
Senses ambient lighting conditions to adjust the
picture when [Auto Brightness] and [Auto White
Balance] (Picture > Ambient Sensor Settings) are
set to [On].
3 Remote control signal receiver (for infrared
communication)
Do not place any objects between the TV remote
≥
control signal receiver and remote control.
4 Input mode selection
Press repeatedly until you reach the desired mode.
≥
Menu
Press and hold for about 3 seconds to display the
≥
menu bar.
OK (when in the menu system)
5 Channel Up / Down
Cursor Up / Down (when in the menu system)
≥
6 Volume Up / Down
≥
Cursor Left / Right (when in the menu system)
7 Mains power On / Off switch
≥
Use to switch the mains power.
≥
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
[
]: Standby / On
≥
4
5
6
7
21
English
Advertisement
Table of Contents
