Removing And Installing A Memory Module; Dimm Population Table - Gigabyte R272-P32 User Manual

3-5-2 Removing and Installing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2

3-5-3 DIMM Population Table

Type
RDIMM
RDIMM
System Hardware Installation
DIMM
Capacity
Ranks Per
DIMM and
Data Width
DIMM Density
SRx4
16GB
DRx8
16GB
1
Speed (MT/s); Voltage (V)
Slot Per Channel (SPC)
DIMM Per Channel (DPC)
1 Slot per
(GB)
Channel
1DPC
8Gb 1.2V
3200
- 27 -
2
2 Slots per
Channel
1DPC 2DPC
1.2V 1.2V
3200 3200