Table of Contents
Advertisement
en Appliance care
15.3 Starting the appliance
care programme
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 34.
¡ The condensation container is
ready for the appliance care pro-
gramme.
→ "Preparing the condensation
container for the appliance care
programme", Page 35.
Set the programme to position 1.
1.
Press and hold Για σιδέρωμα.
2.
Set the programme to position 4.
3.
a "CP1" and the programme duration
alternate on the display.
15.4 Running the basic appli-
ance care programme on
the appliance
To remove any light soiling, you can
run a basic appliance care pro-
gramme.
Note: After a certain period of use,
the appliance automatically recom-
mends that you run the basic appli-
ance care programme. Before the
start and end of the programme, the
display shows the note "CrE" for 5
seconds. The note is shown re-
36
peatedly until the basic appliance
care programme has been run com-
pletely.
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 34.
¡ The appliance care programme
has started.
→ "Starting the appliance care pro-
gramme", Page 36
Add approx. 1 ½ litres of hot tap
1.
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press Έναρξη/Προσθήκη ρούχων.
3.
Advertisement
Table of Contents
