Advertisement
User instructions
Flexi Tabs
Specifically for washing with combination detergents in tablets, which also
contain salt and rinse aid or other agents such as glass protector, steel
rinse aids, etc. When this option is selected, salt and rinse aid will not be
dispensed even if the relative compartments contain them. If the
containers are empty, the lights will remain on.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
With short programs, because there is less time for them to dissolve,
tablets may fail to wash effectively and undissolved residues may be left.
Powder detergents are more suitable for these programs.
For further information, refer to the detergent pack.
N.B.:
When the salt and rinse aid containers are empty, the relative lights will
remain on even if the "Flexi Tabs" option is selected.
IMPORTANT:
when no longer required, the option must be deactivated by pressing the
relative button (the light goes out).
If the water hardness has been set on a value above H3, and the "Flexi
Tabs" option is activated, the relative light flashes, warning of a setting
error. Multi-function products are not suitable for use with very "hard"
water; this does not prevent the use of the option, but the washing results
might not be of the best.
ULTRA CLEAN
The "ULTRA CLEAN" program prolongs the final hot rinse to ensure a
further reduction in the bacteria level. If the temperature in the tank falls
during this stage of the program (e.g. because the door is opened or due to
a power blackout), the light of the option and the program lights (2) flash to
warn that the additional washing phase has not been completed
successfully. This does not mean that the wash program has been less
effective than usual.
18
Advertisement
