Adjusting the angle
1
Place the monitor in an upright position, mounted
on the stand base.
2
Adjust the angle of the screen. The angle of the
screen can be adjusted forwards or backwards for a
comfortable viewing experience.
43UD79
43MU79
Rear Side
WARNING
To avoid injury to the fingers when adjusting the
y
screen, do not hold the lower part of the moni-
tor's frame as illustrated below.
43UD79
43MU79
Be careful not to touch or press the screen area
y
when adjusting the angle of the monitor.
Front Side
ASSEMBLING AND PREPARING
Or
Using the Kensington lock
The Kensington security system connector is located at
the back of the Monitor set.
For more information on installation and usage, refer to
the Kensington lock user manual or visit the website at
http://www.kensington.com.
Connect the Kensington security system cable between
the Monitor set and a table.
Or
NOTE
Use of the Kensington lock is optional.
y
The accessories can be purchased at your local
electronics store.
15