To Deactivate; Time Programming Function; Turning Off A Hotplate Automatically; Automatic Timer - Bosch PIE975N14E Instruction Manual

To deactivate

Select a hotplate.
1.
Press the boost symbol. The Powerboost function has
G
2.
been deactivated.

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Turning off a hotplate automatically

Enter the time period for the hotplate. The hotplate turns off
automatically once the time has elapsed.
How to program
Select the required hotplate and power level.
1.
Press the 0 symbol twice.
2.
function program display.
In the next 10 seconds, program the required time using
3.
symbols 1 to 9.

The cooking time starts to count.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A beep is
heard and . appears in the hotplate and the time
‹ ‹
programming function display shows
When the symbol is pressed, the displays turn off and the
0
beep goes off.
Changing or cancelling the time
Select the hotplate and press the
The __ and r displays appear
Change the cooking time using symbols 1 to 9 or press 0 to
cancel the time.

Cleaning protection

Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning protection
function.
Press the >D symbol. The control panel is locked for
approximately 35 seconds.
The surface of the control panel can now be cleaned without
risk of changing the settings.
‹‹ y __ light up on the time

for 10 seconds.
‹‹
symbol twice.
0
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Notes
If a cooking time has been programmed, the display always
■
shows the time of this function. To check the cooking time
remaining in a hotplate, select a hotplate and press the
0 symbol twice.
If a time has been programmed for several hotplates, the
■
time of the selected hotplate is always shown.
Any cooking time can be programmed for up to 99 minutes.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a hotplate can be modified or the
automatic timer can be turned off.
Press the 0 symbol,several times until the required display
lights up. Change the time of the cooking cycle with the 1 to 9
symbols, or turn off with 0.

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the symbol. The
0
1.
in the time program function display.
Set the required time using symbols 1 to 9.
2.
The time starts again after a few seconds.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
displayed in the time program function display. After pressing
the symbol, the indications turn off.
0
Changing or cancelling the time
Press the 0 symbol, the U
Change the time using the 1 to 9 symbols or press 0 to cancel.
After the time has elapsed, a warning beep will sound and after
a few seconds the function is deactivated. The control panel
lock has been deactivated.
Note: The cleaning protection function does not include the
>D symbol or the main switch. The hotplate may be switched
off when required.
indicator lights up.
V ‹‹
‹‹ and
indicator lights up.
$
lights up
U are
9