Malfunction Table - Bosch HBC86P753B Instruction Manual

Push the safety catches downwards. (Fig. C).
3.
&
Insert the door panel into the guide with both hands. (Fig. D).
4.
Push the door panel downwards, lift it slightly and hook it in
5.
at the top. (Fig. E).
'
Make sure that the door panel is sitting flush with the control
panel.

Malfunction table

Malfunctions often have simple explanations. Please refer to the
malfunction table before calling the after-sales service.
If a meal does not turn out exactly as you wanted, refer to the
Tested for you in our cooking studio section, where you will
find plenty of cooking tips and tricks.
Malfunction table
Problem
The appliance does not work.
"Set clock" appears in the display. The
clock is not showing the current time.
The oven door cannot be opened. The
text "Set clock" appears in the display.
The clock is not showing the current
time.
(
Possible cause
Faulty circuit breaker
Plug not plugged in
Power cut
Power cut
Power cut during self-cleaning operation
Fully open the door, while holding the panels firmly with one
6.
hand. (Fig. F).
Push the door downwards again and tighten the screws
7.
hand-tight using a flat-bladed screwdriver (blade width 8-
11 mm), close the door. (Fig. G).
)
Note: The oven may only be used again when the panels are
correctly installed.
ã=
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
Remedy/information
Look in the fuse box and check that the circuit
breaker is in working order.
Plug it in
Check whether the kitchen light works.
Turn the rotary selector to set the current time
then press the
Turn the rotary selector to set the correct time
then press the
cooking compartment has cooled down. The
symbol goes out. You can now open the
L
oven door.
*
0 button.
0 button. Wait until the
19