Schematic Diagram - Toshiba 37XV505D Service Manual

SCHEMATIC DIAGRAM

Precaution
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION
PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND
"PRODUCT SAFETY NOTICE" OF THIS MANUAL.
CAUTION: The international hazard symbols " " in the schematic diagram and the
parts list designate components which have special characteristics important for
safety and should be replaced only with types identical to those in the original
circuit or specified in the parts list.
The mounting position of replacements is to be identical with originals.
Before replacing any of these components, read carefully the SAFETY
PRECAUTION and PRODUCT SAFETY NOTICE.
Do not degrade the safety of the receiver through improper servicing.
Note:
1. RESISTOR
Resistance is shown in ohm [K=1,000, M=1,000,000]. All resistors are 1/6 W and 5 %
tolerance carbon resistor, unless otherwise noted as the following marks.
1/2R : Metal or Metal oxide of 1/2 watt
1/2S : Carbon composition of 1/2 watt
1RF : Fuse resistor of 1 watt
10 W : Cement of 10 watt
K : ±10 %
G : ±2 %
F : ±1 %
2. CAPACITOR
Unless otherwise noted in schematic, all capacitor values less than 1 are expressed in µF, and
the values more than 1 in pF.
All capacitors are ceramic 50 V, unless otherwise noted as the following marks.
file://C:\Documents and Settings\Serge\Bureau\toshiba_37xv505d-02_[ET]\37XV505...
Page 1 sur 2
16/07/2010