Table of Contents
Advertisement
Hold the wall plates to the wall and align the holes in the
plate to the holes drilled into the wall.
Screw the wall plate to the wall with the self-tapping
screws (G), inserting them through the washers (J).
2B
Drilling the Holes
Attaching to the Wall
(J)
(G)
On the marked holes, drill holes of 5mm diameter
and 60mm depth into the wood stud wall.
WARNING: Please pay attention to the electrical
lines and also the location of gas and water lines
when drilling holes.
3B
INSTALLATION | 15
Advertisement
Table of Contents
