LG ThinQ G8S User Manual page 38

ToF sensor
Front camera
Registering Hand ID
Before using the Hand ID feature, register your palm vein data on your
device.
1
Tap Settings General Lock screen & security Hand ID.
2
Tap NEXT and unlock the screen according to the specified method.
3
Place the device on a flat surface and tap START.
4
Register your palm by following the on-screen instructions.
• Place your palm at a distance of 15 ~ 20 cm (6 ~ 8 inches) from the
device.
• When the device recognises your palm, slowly lower the palm
towards the ToF sensor.
• Tap CONTINUE to register again with the device placed in a
different position.
5
When the palm registration is done, tap OK.
Unlocking the screen with Hand ID
You can unlock the screen with your hand.
1
Tap Settings General Lock screen & security Hand ID.
2
On the Hand ID settings screen, configure the following settings:
• Delete hand data: You can delete the registered Hand ID data and
register it again if the Hand ID does not work properly.
• Cover to wake for Hand ID: You can wake your phone and then
use the Hand ID by covering the screen when the screen is off.
Custom-designed Features
Proximity/Ambient
light sensor
IR illuminator
37