Replacing The Filter; Understanding The Healthy Air Protect Lock - Philips AC0820/32 User Manual

5

Replacing the filter

Understanding the healthy air protect lock

This appliance is equipped with the healthy air protect lock to make sure that the
NanoProtect filter is in optimal condition when the appliance is operating� When the filter is
almost expired, the filter replacement alert (
be replaced� If you do not replace the filter in time, the filter replacement alert (
The appliance will stop operating and get locked�
Replacing the filter
Note:
• The filter is not washable or reusable�
• Always turn off the air purifier and unplug from the electrical outlet before replacing the
filter�
OPEN CLOSE
1
1
Rotate the base anti-clockwise to remove it from the appliance�
2
Pull the filter out from the appliance� Discard the used filter�
3
Remove all packaging materials of the new filter�
4
Put the filter into the appliance�
5
Reattach the base and rotate it clockwise to fasten the base�
6
Put the plug of the air purifier in the power socket�
7
Press the power
8
Press and hold for 3 seconds to reset the filter lifetime counter�
9
Wash your hands thoroughly after replacing the filter�
2 3
button to switch on the appliance�
) lights up red, which indicates that it needs to
4
) will flash�
OPEN CLOSE
5
EN
9