Table of Contents
Advertisement
1.5
M.2 installation
Supported M.2 type varies per motherboard.
•
The illustrations only show the installation steps for a single M.2 slot, the steps are the
same for the other M.2 slots if you wish to install an M.2 to another M.2 slot.
•
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
•
The M.2 is purchased separately.
When installing an M.2 to the M.2 slot, you may need to use the removable screw stand.
1.
Remove the screws from the heatsink.
2.
Remove the heatsink.
1
1
ProArt B660-CREATOR D4
1
2
2
1
2
1
1
1-13
Advertisement
Table of Contents
