Table of Contents
Advertisement
Ø
If intensive foaming occurs repeatedly during washing, please
check the basic dosage setting and dosage strength.
Furthermore, some liquid detergents may have a tendency to
excessive foaming. If the basic dosage settings and dosage
strengths are correct, it is recommended to use a different
liquid detergent.
Change basic dosage amount. ~ Page 40
Ø
If required, convert i-Dos
Instead of softener, a second liquid detergent can also be
used in dispenser i-Dos
Change dispenser content. ~ Page 40
²
– An additional changeable insert for a second detergent is
enclosed and can be fitted in the fill cover.
– When the i-Dos
softener to detergent, the basic dosage amount of detergent
for this container is set to the factory setting (75 ml) and the
dosage for this detergent is set to off in all permitted
programmes. Then select the detergent dosage (light, normal
or strong) via the i-Dos
~ Page 18
The i-Dos
detergent dosage is activated for the i-Dos
The settings are retained for this programme until the next
change.
– When the i-Dos
softener, the basic dosage amount is set to factory setting
(36 ml) and the dosage is set to normal in all permitted
programmes.
– Switching over the container contents requires an additional
acknowledgement via the display panel.
i
Cancel
i
I
ô
i
I
ô
i
I
container content is switched from
ô
i
I
ô
container is automatically deactivated if the
ô
i
I
container content is switched to
A change to the i-Dos content
resets the i-Dos
to their standard value.
ô
dispenser contents.
.
button on the display panel.
i
ô
i
I
settings
ô
I
container.
Continue
37
Advertisement
Table of Contents
