Better Homes and Gardens BG2294BZH-W Manual
Better Homes and Gardens BG2294BZH-W Manual

Better Homes and Gardens BG2294BZH-W Manual

Outdoor 4-burner stainless steel island grill

Advertisement

Quick Links

WARNING
For Outdoor Use Only (outside any enclosure)
WARNING
1. Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage.
2. Read this instruction manual thoroughly
before installing or servicing this equipment.
3. Failure to follow these instructions could
result in fire or explosion, which could cause
property damage, personal injury or death.
4. This instruction manual contains important
information necessary for proper assembly and
safe use this appliance.
WARNING
1. Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of
this or any other appliance.
2. An LP tank not connected for use should not
be stored in the vicinity of this or any other
appliance.
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open the lid.
4. If the odor continues, keep away from the
appliance and immediately call your gas
supplier or fire department.
DANGER
Never operate this appliance unattended.
Save these instructions for future reference.
If you are assembling this unit for someone else,
give this manual to him or her to read save for
future reference.
DO NOT RETURN YOUR GRILL TO THE STORE
Question, problems, missing parts? Don't return the grill to stores, please call our customer service
department at 1-855-CHANT-US (1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday
through Friday for assistance.
OUTDOOR 4-BURNER
STAINLESS STEEL ISLAND GRILL
MODEL NO: BG2294BZH-W
Call Customer Service Hotline
1-855-242-6887
1
MAIN BBQ GRILL
VSN.: BH16-101-09903G
SINK MODULAR
VSN.: BH16-101-09903S
DRAWER MODULAR
VSN.: BH16-101-09903D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BG2294BZH-W and is the answer not in the manual?

Questions and answers

Summary of Contents for Better Homes and Gardens BG2294BZH-W

  • Page 1: Cover

    OUTDOOR 4-BURNER STAINLESS STEEL ISLAND GRILL WARNING For Outdoor Use Only (outside any enclosure) MODEL NO: BG2294BZH-W WARNING MAIN BBQ GRILL 1. Improper installation, adjustment, alteration, service or maintenance can cause injury or VSN.: BH16-101-09903G property damage. 2. Read this instruction manual thoroughly SINK MODULAR before installing or servicing this equipment.
  • Page 2 DANGER WARNING If you smell gas: 1. Do not store or use gasoline or other flammable liquids or vapors in the 1. Shut off gas to the appliance vicinity of this or any other appliance. 2. Extinguish any open flame 3.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Cover …………….…………………………………….………...….………….………….….………..1 Table of Contents……………………………………….………...….………….…………………….3 Safety Information…………………………………….………...….………….….…………………..4 Main BBQ Grill Exploded View………….……………………………………………….....7 Main BBQ Grill Parts List…..…..….…....……………..………...…….....8 Main BBQ Grill Hardware Contents…………………………………………………….…………10 Main BBQ Grill Assembly Instructions………….……….……………………………………….11 Sink Modular Exploded View……………….……………………………………………....19 Sink Modular Parts List….…………..…..….…....……………..………...……...20 Sink Modular Hardware Contents……………………………………………………….…20 Sink Modular Assembly Instructions…………….…….……………………………………….21 Drawer Modular Exploded View……………….…………………………………………....27 Drawer Modular Parts List….……………..…..….…....……………..……….....28...
  • Page 4: Safety Information

    SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call our customer service at 1-855-CHANT-US(1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday through Friday for assistance. The installation and repairs of this appliance must conform with local codes or, in the absence of local odes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or Natural Gas and Propane Installation Code, CSA/CGA-B149.1.
  • Page 5 SAFETY INFORMATION Do not use the grill unless it is COMPLETELY assembled and all parts are securely fastened and tightened. Do not build this model of grill in any built-in or slide in construction. Ignoring this warning could cause a fire or an explosion that can damage properly and cause serious bodily injury or death This grill should be thoroughly cleaned and inspected on a regular basis.
  • Page 6 SAFETY INFORMATION Use only a ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance. Never remove the grounding plug or use with an adapter of 2 prongs; and use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved for outdoor use with a W-A marking.
  • Page 7: Main Bbq Grill Exploded View

    MAIN BBQ GRILL EXPLODED VIEW C1+D1+E1 45 44 42 41 39 383736 35...
  • Page 8: Main Bbq Grill Parts List

    MAIN BBQ GRILL PARTS LIST PART DESCRIPTION PART NO ※Lid Handle 2307563 ※Lid Handle Bezel 5201177 ※Lid Spacer 2100158 2307001 ※ R-Pin ※Lid Axis 2406690 ※Lid Assembly 229G001 ※Temperature Gauge 2406912 Cooking Grate 2409489 Warming Rack 2310685 Heat Tent 5207190 ※Tube Burner 2409257 ※Tube Burner Ignition Pin...
  • Page 9 MAIN BBQ GRILL PARTS LIST PART DESCRIPTION PART NO Right Drip Tray Support 5201883 Right Side Panel 5207197 ※Weight Plate 2406712 Lockable Castor 2100470 ※Retention Screw 229G005 Triangle reinforcing Plate 5201879 Unlockable Castor 2100471 Door Screw Socket 2100481 Door Handle Bezel 5201175 Door Handle 5204382...
  • Page 10: Main Bbq Grill Hardware Contents

    MAIN BBQ GRILL HARDWARE CONTENTS A1 M6X16mm Silver Screw X 20 B1 M6X12mm Silver Screw X 23 C1 M4X12mm Screw X 24 D1 M4X10mm Screw E1 M4 Nut F1 M4 Plastic Washer G1 M6 Flat Washer X 20 H1 M6 Spring Washer X 20 I1 AA Battery ASSEMBLY PREPARATION...
  • Page 11: Main Bbq Grill Assembly Instructions

    MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS IMPORTANT: ASSEMBLE ON FLAT AND SOFT SURFACE TO AVOID SCRATCHING. 1. Attach Unlockable Castors (38) in the front and Lockable Castors (35) in the back as shown. A1 M6X16mm Silver Screw X 16 X 16 G1 M6 Flat Washer H1 M6 Spring Washer X 16...
  • Page 12 MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS 3. Attach Cabinet Reinforcing Bars (31) as shown. B1 M6X12mm Silver Screw 4. Attach Front Beam (27) and Triangle reinforcing plates (37). B1 27 B1 M6X12mm Silver Screw X 12...
  • Page 13 MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS 5. Attach Left Drip Tray Support (23) and Right Drip Tray Support (32) to the side panels. B1 M6X12mm Silver Screw 6. Put Drip tray (14) onto the Drip Tray Supports. D1 14 D1 M4X10mm Screw E1 M4 Nut F1 M4 Plastic Washer...
  • Page 14 MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS 7. Loosen the pre-assembled M5 x15 screws from Door Handles (41), attach Door Handles (41), Door Handle Bezel (40) and Door Screw Sockets (39) to the Left & Right Door (43/44), and then fasten the screws. M5x15 Screw 8.
  • Page 15 MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS 9. Attach Left door (44) and Right door (43) to Door Hinges (42), and then tighten all of the screws, including the screws in last step. Note: Two adjusting screws inside the door hinge, which can be used to adjust the distance as shown.
  • Page 16 MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS 10. The Regulator & Hose Assembly is located inside of the control panel. Please untie it and hang it as the picture shown. Attach Firebox Assembly (21) on the top of the cabinet and fasten the screws and washers as shown. A1 M6X16mm Silver Screw G1 M6 Flat Washer H1 M6 Spring Washer...
  • Page 17 MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS 12. Open the door, pull out the Hose Clip Hook (28) and secure the hose into the hook. Then attach Grease Cup (13) as shown. 13. Attach Hose Heat shield (26) to Front Beam (27). 26 27 D1 M4X10mm Screw...
  • Page 18 MAIN BBQ GRILL ASSEMBLY INSTRUCTIONS 14. Place AA battery (I1) into the Electronic Igniter with the positive (+) end facing out, and then attach Knobs (20) to bezels. I1 AA Battery 15. Your Main BBQ Grill is now assembled.
  • Page 19: Sink Modular Exploded View

    SINK MODULAR EXPLODED VIEW...
  • Page 20: Sink Modular Parts List

    SINK MODULAR PARTS LIST PART DESCRIPTION PART NO 2307729 ※Sink Assembly 229S001 Water Inlet Hose 229S002 Launching Device Assembly 229S003 Door Screw Socket 2100481 Door Handle Bezel 5201175 Door Handle 5204382 Right Door 229S004 Left Door 229S005 Left Side Panel 5207196 Hinge Spacer 5207205...
  • Page 21: Sink Modular Assembly Instructions

    SINK MODULE ASSEMBLY INSTRUCTIONS 1. Attach Unlockable Castors (19) and Lockable Castors (18) as shown. A2 M6X16mm Silver Screw X 16 X 16 D2 M6 Flat Washer E2 M6 Spring Washer X 16 2. Attach Left Side Panel (10) and Right Side Panel (15) onto Bottom Panel. B2 M6X12mm Silver Screw...
  • Page 22 SINK MODULAR ASSEMBLY INSTRUCTIONS 3. Attach Back Panel (13). B2 M6X12mm Silver Screw 4. Attach Front Beam (12) and Triangle Reinforcing Plates (17) as shown B2 M6X12mm Silver Screw X 12...
  • Page 23 SINK MODULAR ASSEMBLY INSTRUCTIONS 5. Loosen the pre-assembled M5 x15 screws from Door Handles (7), attach Door Handles (7), Door Handle Bezel (6) and Door Screw Sockets (5) to Left & Right door (8/9), and then fasten the screws. M5x15 Screw 6.
  • Page 24 SINK MODULAR ASSEMBLY INSTRUCTIONS 7. Attach Left door (8) and Right door (9) to Door Hinges (16), and then tighten all of the screws, including the screws in last step. Note: Two adjusting screws inside the door hinge, which can be used to adjust the distance as shown.
  • Page 25 SINK MODULAR ASSEMBLY INSTRUCTIONS 8. Assemble Sink assembly (2) onto the cabinet as shown. A2 M6X16mm Silver Screw...
  • Page 26 SINK MODULAR ASSEMBLY INSTRUCTIONS 9. Install Tap (1) and Launching Device Assembly (4) onto the Sink Assembly (2) as shows. Put Water Inlet Hose (3) and Outlet Hose respectively through the holes on the back panel. Warning: Water is only for outdoor cleaning needs, not directly for drinking. Please pay attention that the collection and treatment of wastewater must comply with local laws and regulations 10.
  • Page 27: Drawer Modular Exploded View

    DRAWER MODULAR EXPLODED VIEW...
  • Page 28: Drawer Modular Parts List

    DRAWER MODULAR PARTS LIST PART DESCRIPTION PART NO ※Drawer Assembly 229D001 Door Screw Socket 2100481 Door Handle Bezel 5201175 Door Handle 5204382 Right Door 229D002 Left Door 229D003 Front Beam 5207199 Left Side Panel 5207270 Hinge Spacer 5207205 Back Panel 5203721 Bottom Panel 5207251...
  • Page 29: Drawer Modular Assembly Instructions

    DRAWER MODULAR ASSEMBLY INSTRUCTIONS 1. Attach Unlockable Castors (16) and Lockable Castors (15) as shown. A2 M6X16mm Silver Screw X 16 D2 M6 Flat Washer X 16 E2 M6 Spring Washer X 16 2. Attach Left Side Panel (8) and Right Side Panel (12) on Bottom Panel. B2 M6X12mm Silver Screw...
  • Page 30 DRAWER MODULE ASSEMBLY INSTRUCTIONS 3. Attach Back Panel (10) as shown. B2 M6X12mm Silver Screw 4. Attach Front Beam (7) and Triangles (14) as shown. B2 M6X12mm Silver Screw X 12...
  • Page 31 DRAWER MODULE ASSEMBLY INSTRUCTIONS 5. Loosen the pre-assembled M5 x15 screws from Door Handles (4), attach Door Handles (4), Door Handle Bezel (3) and Door Screw Sockets (2) to Left & Right Door (5/6), and then fasten the screws. M5x15 Screw 6.
  • Page 32 DRAWER MODULAR ASSEMBLY INSTRUCTIONS 7. Attach Left door (5) and Right door (6) to Door Hinges (13), and then tighten all of the screws, including the screws in last step. Note: Two adjusting screws inside the door hinge, which can be used to adjust the distance as shown C2 M4X12mm Screw...
  • Page 33 DRAWER MODULAR ASSEMBLY INSTRUCTIONS 8. Attach Drawer Assembly (1) onto the cabinet as shown. A2 M6X16mm Silver Screw 9. Your Drawer Modular is now assembled.
  • Page 34: Island Grill Combination Assembly Instructions

    ISLAND GRILL COMBINATION ASSEMBLY INSTRUCTIONS 1. Combine Sink Module to BBQ grill as shown. E2 D2 A2 M6X16mm Silver Screw D2 M6 Flat Washer E2 M6 Spring Washer 2. Combine Drawer Modular to Main BBQ grill as shown. D2 E2 A2 M6X16mm Silver Screw D2 M6 Flat Washer E2 M6 Spring Washer...
  • Page 35: Natural Gas Conversion

    NATURAL GAS CONVERSION PREPARATION: Before beginning conversion, make sure all parts are present. Compare parts with package contents. If any part is missing or damaged, do not attempt to convert. Please have your owner’s manual and part number available for reference, and contact customer service 1-855-242-6887 for replacement parts.
  • Page 36 NATURAL GAS CONVERSION IMPORTANT: After your grill is converted to natural gas, the working pressure for natural gas is 7 in. water column (WC). Gas pressure is affected by gas line size and the length of gas line run from house.
  • Page 37 NATURAL GAS CONVERSION WARNING: Place the grill on a flat, level surface. Before the conversion, make sure all control knobs are in the OFF position, LP tank valve is closed, and tank is disconnected from regulator and removed from grill. Find the part number in Main BBQ Grill Parts List on page 8 to 9.
  • Page 38 NATURAL GAS CONVERSION 3. Loosen the screw from LPG setting, rotate the shutter opening counterclockwise, adjusting it from LP setting to NG setting. Re-tighten the screw into NG setting for securing the air shutter opening. 4. Unscrew the old LP orifice from each gas valve with the orifice removal tool. Put a new NG orifice into the valves and tighten with tool.
  • Page 39 NATURAL GAS CONVERSION 5. Reinstall the main burner and R pin. Make sure to engage the burner valves. Then Put the heat tents, cooking grates back to grill. 6. Step 1, Loosen the screw to remove the Hose Heat Shield (26) from Front Beam first. Step 2, Use a wrench to detach the LP regulator and hose from fitting as shown.
  • Page 40 NATURAL GAS CONVERSION 7. Remove the 4 main burner control knobs by grasping and pulling out. Insert the slotted screwdriver (Not Included) into the hole of each main burner control valve shaft as shown. Rotate the shaft counterclockwise (to the left) as far as it will go (about 2 complete turns) until it stops.
  • Page 41: Liquid Propane Gas Instructions

    DO NOT RETURN YOUR GRILL TO THE STORE. LIQUID PROPANE GAS INSTALLATION Gas grills that are set to operate with Liquid Propane Gas come with a high capacity hose and regulator (Note: Only use the pressure regulator and hose assembly supplied with the assembly.
  • Page 42 LIQUID PROPANE GAS INSTALLATION 6. Open the tank valve fully (counterclockwise). Use a soapy water solution to check all connections for leaks before attempting to light your grill. See “Leakage Testing" on page 44. If a leak is found, turn the Tank Valve off and do not use your grill until the leak is repaired. Gas tank must be placed into the tank tray vertically (see Fig.3a).
  • Page 43 LIQUID PROPANE GAS INSTALLATION Disconnecting A Liquid Propane Fig. 5 Gas (LP Gas) Tank From Your Grill: 1. Turn the burner knobs and LP gas tank valve to the full OFF position. (Turn clockwise to close.) 2. Detach the hose and regulator assembly from the LP gas tank valve by turning the quick coupling nut counterclockwise.
  • Page 44: Operation Instructions

    OPERATING INSTRUCTIONS • Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage or any other enclosed area. WARNING • Only a qualified gas supplier should refill DO NOT store a spare L.P. gas cylinder under the L.P.
  • Page 45 OPERATING INSTRUCTIONS Please refer to diagram for proper installation (see Fig. 8). Visually check the connection between the burner venture pipe and orifice. Make sure the burner venture pipe fits over the orifice. Fig. 8 Burner venturi pipe Valve Soft Pipe LP Gas Valve Connection with Orifice...
  • Page 46 OPERATING INSTRUCTIONS Storage of an outdoor gas cooking appliance indoor is permissible only if the cylinder is disconnected and removed from the appliance. Heat& WARNING Heat and smoke exhaust out of the Smoke back of the grill hood opening. Make sure not to have the Exhaust grill back facing your home or anything that could be damaged by heat or smoke.
  • Page 47: Lighting Instructions

    LIGHTING INSTRUCTIONS Checking orifices alignment with burners Orifices may shift during assembly and movement. Check the orifices alignment with the burners according to the following illustrations before lighting. Orifice stud inside the air shutter Main Burner and Orifice Relationship LIGHTING INSTRUCTIONS: Warning: Do not lean over grill when lighting.
  • Page 48 LIGHTING INSTRUCTIONS Remove the main cooking grate and flame tamers. Keep your face as far away from the grill surface as possible and pass the match extender to the ports of the main burner tubes. Position the match near the burner ports and push and turn the control knob counter-clockwise to the “HIGH”...
  • Page 49: Care And Maintenance

    CARE AND MAINTENANCE However, there are steps you must take to prevent cracking of the burner's ceramic surfaces, which will cause the burners to malfunction. The following are the most common causes of cracks and the steps you must take to avoid them. Damage caused by failure to follow these steps is not covered by your grill warranty.
  • Page 50 CARE AND MAINTENANCE DRIP TRAY The drip tray should be cleaned periodically to prevent heavy buildup of debris. NOTE: Allow the drip tray to cool before attempting to clean. Important: Do not leave the grill outside during inclement weather unless it is covered. Rain water can collect inside of the grill, the grill cart or the drip tray if left uncovered.
  • Page 51: Troubleshooting

    TROUBLESHOOTING Many solutions given here can make your grilling experience safer and more enjoyable. You can also call customer service department at 1-855-CHANT-US(1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday through Friday for assistance. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1. The ignition wire came off the 1.
  • Page 52 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1. This model is set for 7 in. natural gas usage. Please check your natural gas supply system to have correct gas pressure. Regulator is not needed for Low heat 1. Low heat is found in natural NG model.
  • Page 53: Warranty

    WARRANTY Proof of purchase is required to access this warranty program, which is in effect from the date of purchase. Customers will be subject to parts, shipping, and handling fees if unable to provide proof of the purchase or after the warranty has expired. If you have any questions or problems, you can call our customer service department at 1-855-CHANT-US (1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday through Friday for assistance.

Table of Contents