Using the Low Heating Function
This function operates the heating system to
maintain a minimum room temperature and
prevent objects in the room from freezing where
there is no permanent resident, such as a
vacation.
,
are displayed on the display screen.
•
NOTE
• This function is available with Heating Mode.
• During LH operation, when you press buttons
such as
,
, Mode, Fan Speed, and then
return to Heating Mode.
• If Jet Mode button is pressed during LH
operation, this function is disabled and Power
Heating Mode is operated immediately. (only
for power heating model)
• In case an error occurred, operation can be
interrupted for the protection of the product.
• Comfort Air and
while the LH function is in operation.
Using the Mosquito Away
Function
This function fans away mosquitos by
generating a high-frequency wave.
is displayed on the display screen.
•
NOTE
• You can use this function without turning the
air conditioner on.
is displayed on some indoor units.
•
28
button cannot be used
Swing
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor unit.
This function removes such moisture.
•
is displayed on the display screen.
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• When UVnano Function is set, Auto Clean
Function works together.
• If you turn off the unit, the fan continues to run
for 30 minutes and cleans the inside of the
indoor unit.
•
is displayed on some indoor units,
depending on the model.
Using the Comfort Sleep Function
This function operates the air conditioner
automatically to make the comfortable sleep
environment.
,
are displayed on the display screen.
•
NOTE
• This function is available with Cooling Mode.
• The vane stops swing and sets indirect airflow
angle, after 30 minutes from start even though
the room temperature doesn't decrease to
optimal temperature to sleep.
• It is possible that a comfortable sleep
environment is different according to the
people.
EN