Frequency Characteristics - Yamaha TR-5630RDS Owner's Manual

1
Set the VOLUME control to minimum (0).
2
Turn on the power of all the other
components.
3
Press the POWER switch to the ON position.
* The power indicator on the front panel lights
up in green.
4
Play a source containing low-frequency
components and adjust the amplifier's
volume control to the desired listening level.
5
Increase the volume gradually to adjust the
volume balance between the subwoofer and
the main speakers.
Normally, set the control to the level where you
can obtain a little more bass effect than when
this unit is not used.

Frequency characteristics

Fig. 1 shows the frequency characteristics of the subwoofer.
100 dB
90
80
70
60
50
40
20 50 100
Fig. 1
All manuals and user guides at all-guides.com
200 500 Hz
● Once the volume balance between the subwoofer and
the main speakers is adjusted, you can adjust the
volume of your whole sound system by using the
amplifier's volume control.
However, if you change the main speakers (NX-E130)
to others, you must make this adjustment again.
● For adjusting the VOLUME control, refer to
"Frequency characteristics" below.
Fig. 2 shows the frequency characteristics when the
subwoofer is combined with NX-E130 and the subwoofer's
volume level is set to the figured position.
100 dB
90
VOLUME
80
70
60
0 I0
50
40
20
SW-P130
NX-E130
50 100 200 500 Hz
Fig. 2
11
E-