Cuisinart CHW12P1 Quick Start Manual

Cuisinart CHW12P1 Quick Start Manual

Advertisement

Cleaning Your Coffeemaker:

Filter basket, carafe and lid.
Turn unit off and remove plug from outlet.
Wash filter basket, carafe and lid in warm, soapy water and rinse
thoroughly, or clean in upper rack of dishwasher. Dry after use.
Wipe area under the filter basket with a damp cloth. NOTE: DO NOT puT
aNy waTEr iN ThE uNiT ONcE filTEr baskET is rEmOvED.
To clean base, wipe with damp cloth.
Do not use any scouring agents or harsh cleaners on any parts of the
coffeemaker. Never immerse base of unit in water.

Decalcification:

A flashing Clean light indicates unit needs to be decalcified. Fill the water reservoir to
capacity with 1/3 cup of white vinegar and 2/3 cup of water. Press the Clean button; when
light comes on, turn Coffeemaker on. Five beeps sound when Clean cycle is complete; unit
will shut off. Turn unit back on and if Clean light flashes, repeat process; if not, run a brew
cycle with water only. Unit is then ready to use

Cleaning Your Hot Water System:

We recommend you decalcify your hot water system twice a year.
Dispense any water in your reservoir until the Add Water light flashes. Add 32 ounces of
white vinegar. Dispense 16 ounces of vinegar and discard; this will fill the inner tank. Let unit
sit for 20 minutes, then turn to Off and allow hot vinegar to cool. Drain internal reservoir over
sink by removing water release tab on bottom of unit. When vinegar has completely drained,
replace tab. Refill reservoir with water and drain water as directed above. Unit is now ready
to use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHW12P1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Cuisinart CHW12P1

  • Page 1 Cleaning Your Coffeemaker: Filter basket, carafe and lid. Turn unit off and remove plug from outlet. Wash filter basket, carafe and lid in warm, soapy water and rinse thoroughly, or clean in upper rack of dishwasher. Dry after use. Wipe area under the filter basket with a damp cloth. NOTE: DO NOT puT aNy waTEr iN ThE uNiT ONcE filTEr baskET is rEmOvED.
  • Page 2 Quick ReFeRence Guide Programming To Program the Auto On: To Set the Time: Turn the Function Turn the Function knob to PROG; the knob to CLOCk. Press and hold Hour or Auto-On LED will flash. Set the time you Minute button until the clock begins flashing. want coffee to begin brewing (follow Set Hold down the Hour or Minute button to scroll the Time instructions).
  • Page 3 Quick ReFeRence Guide SetuP and uSe: Coffeemaker Fully immerse the charcoal water filter in Pour desired amount of water into water cold tap water and soak for 15 minutes (see reservoir (a water level indicator is located complete instructions on page 7 of your on the side of the unit).
  • Page 4 2. Hot Water System: Follow directions for using In order to ensure proper operation and Hot Water System, then dispense all hot water to optimum performance, please read the entire flush the system. Instruction Booklet. You are now ready to enjoy your new Cuisinart Coffeemaker/Hot Water System!

Table of Contents