Operating Instructions
How to insert the Batteries
1. Remove the battery cover by pulling it according to the arrow
direction.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.
3. Reattach the cover by sliding it back into position.
NOTICE
Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
Storage and Tips for using the Remote Controller
• The remote controller may be stored by mounting
it on a wall.
Signal receptor
Receives the signals from the remote controller.(Signal receiving
sound: two short beeps or one long beep.)
• To operate the room air conditioner, aim the
remote controller at the signal receptor.
Singnal receptor
Operating Instructions
Owner's Manual 13