Operation - Rowenta AUTO COMFORT BU7500F0 Manual

6- OPERATION

Before switching on your appliance ensure that:
- The wheels have been correctly fitted as described in these instructions.
- The air intake and outlet grills are completely unobstructed
- The appliance is in a stable position on a flat surface.
A - Switching on
Plug the appliance in and press the On/Off switch (H).
On the LCD display (J) you will see the power rating (2000W) and the temperature setting (23° by default).
After a few seconds the temperature will stop flashing and the temperature set will be displayed.
The radiator will operate at 2000W until a temperature of 23° is reached. It will then keep the room at this temperature.
Note: The blue backlighting of the display screen turns off after 30 seconds but the functions selected are still visible on the screen.
To light up the LCD screen press the + or – buttons.
Please note that when you turn the appliance on you may hear a slight noise.
You can continue to use it and the noise will soon cease.
B - Operating modes
B1 - Manual
You must set the power and temperature desired.
The radiator will then regulate the room temperature according to your setting.
Selecting the power :
Press the Mode button (L)
Selecting the temperature :
Press the + or – buttons (G) to increase or reduce the temperature. The range available is from 5° to 35°.
The temperature you have chosen will be displayed on the screen and set after a few seconds.
B2 - Auto Comfort Mode
If you press the Auto Comfort button (N), your radiator will operate at full power (2000W) until the room reaches 21°. It will then keep
the room at this temperature.
This function is programmed for a 3 hour period by default but you may increase or reduce the time by pressing the + or – buttons (G)
while the time is flashing.
(The period selected will be set automatically after a few seconds.)
The timer will count down the period of operation.
You can interrupt the AUTO COMFORT option at any time by pressing the button (N) again or change the function by pressing the Mode button (L).
The Auto Comfort function will then be disabled (indicator light off).
C - Additional functions
Timer and programmed start time
When you have selected the power and set the temperature, press the Clock button (M) to select TIMER
or PROG (programmed start time).
While the Timer or Prog icons are flashing you can change the number of hours of operation using the + and – buttons (G).
The time set is in hours and counts down at the end of each hour.
Select
power
TIMER Function
This option allows you to programme the operation of your appliance for a period of 1 to 24 hours.
At the end of this period it will turn off automatically and go to STANDBY mode.
To change to a different mode of operation press the Mode button.
To turn the appliance off completely press the On/Off button (H).
Set
temperature
Select TIMER or
PROGRAMMED START
5
Set length of
operating time
EN