The Control Panel; Changing A Programme; Cancelling A Programme - Sharp QW-NS14I49EX-EU User Manual

7. THE CONTROL PANEL

i
2
1
1. On/Off button
2. Programme Selection Button
i. Programme Leds
3. Half Load Button
ii. Half Load Led
4. Delay Button
iii. Delay Leds
iv. Salt Indicator
v. Rinse Aid Indicator
vi. End of Programme Indicator
1. On/Off Button
Switch the machine on by pressing On/Off
button. When machine is on, the End Of
Programme Indicator (vi) will illuminate.
2. Programme Selection Button
Select a suitable programme for your
dishes by pressing Programme
Selection button. The Programme Led (i)
corresponding to the selected programme
will illuminate and the End Of Programme
Indicator (vi) will switch off. The programme
will start automatically when the door is
closed.
3. Half Load Button
Press the Half Load button to reduce the
duration of the selected programme, and
therefore decrease your energy and water
consumption. When Half Load option is
selected, Half Load led (ii) will illuminate.
4. Delay Button
Press the Delay button to delay the start
time of a programme for 3, 6 or 9 hours.
Pressing once will delay the start time for 3
hours, pressing twice for 6 hours, and three
times for 9 hours. Press the Delay Timer
button to change or cancel the delayed start
time. The Delay led (iii) corresponding to
the remaining delay duration (3h, 6h, 9h)
ii
iv
v
3 4 iii vi
EN - 18
will be on. If you switch off the machine
after activating the delay time, the delayed
time is cancelled.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator (iv) will illuminate to indicate the
salt chamber needs filling.
NOTE: When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
(v) will illuminate to indicate the rinse aid
chamber needs illing.

7.1. Changing a Programme

Follow the steps below to change a
programme while in operation.
NOTE: Open the door slightly at first to
stop a programme before it is complete in
order to avoid water spillage.
Open the door and select a new
programme using the Programme
After closing the door, the new
programme will resume the course
of the old programme.

7.2. Cancelling a Programme

Follow the steps below to cancel a
programme while in operation.
Selection button.