Basic Settings; Cleaning And Servicing - Bosch FFL023M Series User Manual And Installation Instructions

en Basic settings
11

Basic settings

You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting
Button tone
Demo mode
1
Factory setting (may vary according to model)
11.2 Changing basic settings
Requirement: The appliance is switched off.
Press and hold and
1.
a The display shows
To edit the basic setting, press
2.
a The selected setting lights up in the display.
Use the rotary selector to set the required selection.
3.
To accept the basic setting, press
4.
To exit the basic setting, press
5.
Use the rotary selector to change to the basic set-
6.
ting ⁠ .
To edit the basic setting, press
7.
a The selected setting lights up in the display.
Use the rotary selector to set the required selection.
8.
To accept the basic setting, press
9.
To exit the basic setting, press
10.
12

Cleaning and servicing

To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
12.1 Cleaning products
Only use suitable cleaning products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners for cleaning the ap-
▶
pliance while it is hot.
12
Selection
= off
1
= on
1
= off
= on
for a few seconds.
for the first basic setting.
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
Description
Switching the button tones on or off
Note: You cannot switch off the button tone for
⁠ .
The appliance is switched off. You can use the buttons
and the display. The buttons have no function, meaning
that no power arises for the microwave, for example.
Dealers predominantly use the demo mode.
While the demo mode is activated, the display shows
To exit the basic settings menu, press
11.
Tip: You can change this setting again at any time.
11.3 Changing the time
You can change the time on the clock at any time.
Press ⁠ .
1.
Set the time using the rotary selector.
2.
Press to confirm the time.
3.
11.4 Hiding the clock in standby
You can hide the clock when the appliance is in
standby mode.
Press ⁠ .
1.
Press ⁠ .
2.
to display the clock again.
Note: Press
Only use glass cleaners, glass scrapers or stainless
▶
steel care products if recommended in the cleaning
instructions for the relevant part.
Wash sponge cloths thoroughly before use.
▶
You can find out which cleaning products are suitable
for each surface or part of the appliance in the indi-
vidual cleaning instructions.
12.2 Cleaning the appliance
Clean the appliance as specified. This will ensure that
the different parts and surfaces of the appliance are
not damaged by incorrect cleaning or unsuitable clean-
ing products.
Read the information on cleaning products.
1.
→ Page 12
Follow the instructions on cleaning the appliance
2.
components or surfaces.
Unless otherwise specified:
3.
Clean the appliance components with hot soapy
‒
water and a soft, damp cloth.
and
⁠ .
again.