Blomberg LDV63440 User Manual page 34

Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the L:
position on the display. Interior lighting
is off in "L:0" position and on in "L:1"
position. Select the position you want
with the Time Delay key.
3. Switch off the machine with the On/Off
key to save the changes.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Self Cleaning Filter
(depends on the model)
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
34/EN
Auto Door Opening
(Depends on the Model)
"Auto Door Opening" feature of your
machine increases drying efficiency of your
machine and saves energy. There are two
options: "OFF" and "ON".
To activate the feature of Auto Door
Opening:
1. Press Auto Door Opening button.
When the function is active, the
indicator showing the selection of the
function lights up.
2. Auto Door Opening is activated.
When you activate this function, the door
of your machine opens automatically at the
end of the washing program.
To deactivate the feature of Auto
Door Opening:
1. Press the button of Auto Door Opening.
When the function is deactivated, the
indicator showing the selection of the
function turns off.
2. Auto Door Opening is deactivated.
Auto Door Opening opens the door
of the machine at the end of the
washing circle, thanks to the "door
opening shafts". This process takes
approximately 2 minutes. If the power
fails while the shafts are moving out,
do not force to close the door. When
the power is back, the process shall be
completed, and the shafts shall return
to their initial position.
Auto Door OpeningThe function
of may change the duration of the
selected program.