Advertisement
18. BATTERY DOOR
19. AUX-IN JACK
20. AC SOCKET
Start-up of the device/introduction
• Select a suitable location for the device, such as a dry, flat, non-slip surface on which it is
easy to operate the machine.
• Ensure that the device is sufficiently ventilated.
• Remove the protective film from the display if it is still present.
Power Supply
• Ensure that the voltage is the same as that indicated on the model identification plate.
• Connect the power cable supplied (see battery compartment if necessary) to a properly
installed safety power socket and the mains connector AC on the back of the machine.
Inserting the Batteries (not included)
1. Open the lid of the battery compartment.
2. Insert 6 "C" size 1.5 V batteries. Please ensure that the polarity is correct (see the floor of
the battery compartment)!
3. Then close the battery lid.
NOTE:
When a mains cable is connected the batteries are automatically switched off.
CAUTION:
• Batteries can leak and lose battery acid. When not using the system for a long period of
time, remove the batteries.
• Different battery types or new and used batteries must not be used together.
• Do not dispose of batteries with household waste. Return old batteries to the respective
collection facilities or your dealer.
Advertisement
