Table of Contents
Advertisement
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information
provided with and on this jack before using. The owner and/or operator of this jack shall
have an understanding of the jack and safe operating procedures before attempting to
use. The owner and/or operator shall be aware that the use and repair of this product
may require special skills and knowledge. Instructions and safety information shall be
conveyed in the operator's native language before use of this jack is authorized. If any
doubt exists as to the safe and proper use of this jack, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts
(including labels) are noted. Any jack that appears damaged in any way, operates
abnormally or is missing parts, shall be removed from service immediately. If you suspect
that the jack was subjected to a shock load (a load dropped suddenly, unexpectedly upon
it), immediately discontinue use until the jack has been checked by a factory authorized
service center (contact distributor or manufacturer for list of Authorized Service Centers).
It is recommended that an annual inspection be done by qualified personnel. Labels and
owner's manuals are available from manufacturer (see page 7).
PRODUCT DESCRIPTION
This Low Profile Floor Jack features a 5,000 lbs. maximum capacity. Lifting range for this
jack is 3-3/8 inches to 14-7/8 inches. Jack features an overload valve bypass system to
prevent jack damage and user injury
Cover plate
(Remove to access
Saddle
Oil Fill Plug)
Oil Fill Plug
Lifting
(Not shown, on
arm
reservoir)
Handle
socket
Front
wheel
Release
valve
Engage
release valve
Jack
with this end
handle
Caster
Figure 1 - Typical Floor Jack Nomenclature
2
Advertisement
Table of Contents
