*1
The remote voice assist feature is only available for KX-TGD660 series.
n KX-TGDA63: For KX-TGD660 series users
Function
Remote voice
assist
Registering a handset to a base unit
1
Base unit:
Press and hold MLOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
then repeat this step.
2
Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and
is displayed.
Note:
R If an error tone sounds, or if
the base unit's operating instructions.
Display language
1
MMENUN#110
2
MbN: Select the desired setting. a MSAVEN a MOFFN
FCC and other information
This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise might be heard in your Hearing Aid.
Some Hearing Aids are not adequately shielded from external RF (radio frequency)
energy. If noise occurs, use an optional headset accessory or the speakerphone
option (if applicable) when using this phone. Consult with your audiologist or
Hearing Aid manufacturer about the availability of Hearing Aids which provide
adequate shielding to RF energy commonly emitted by digital devices.
For assistance, please visit http://shop.panasonic.com/support
Supplied
handset
M
N
is displayed, register the handset according to
Installation
Optional
handset
(KX-TGDA63)
MFLASHN/
MCALL WAITN
7